Loading ...
Loading ...
Loading ...
33
of the parameter name and select a data display mode.
Show – tap this option to switch between the two options; one displays
the selected parameter items, the other displays all the available items.
Setting – tap this button to open a setting screen, which allows you to
set the trigger mode, recording duration, and various threshold values
for data recording and make other controls.
There are four navigation buttons on top of the Setting mode screen.
Selected Button – displays the configuration screen on which you can
set the threshold values, an upper limit and a lower limit, for triggering
the buzzer alarm. This function is only applied to the Waveform Graph
display mode.
a) MIN – tap to open a virtual keyboard, allowing you to enter the
required lower limit value.
b) MAX – tap to open a virtual keyboard, allowing you to enter the
required upper limit value.
c) Buzzer Alarm – switches the alarm on and off. The alarm function
makes a beep sound as a reminder whenever the data reading
reaches the preset minimum or maximum point.
To set threshold limits for the parameter values
1. Tap the Setting functional button at the bottom of the Live Data
screen.
2. Tap the Selected navigation button.
Figure 4-15 Sample Setting Mode in Live Data
Loading ...
Loading ...
Loading ...