Loading ...
Loading ...
Loading ...
31
mode, and one Help button on the right that you can tap for additional
information.
Each parameter item displays the selected mode independently.
1) Analog Gauge Mode – displays the parameters in form of an analog
meter graph.
2) Text Mode – this is the default mode which displays the parameters
in texts and shows in list format.
NOTE
Reading of status parameters, such as a switch reading, which are mostly in
word form, like ON, OFF, ACTIVE, and ABORT, etc., can only be displayed
in Text Mode. Whereas reading of value parameters, such as a sensor
reading, can be displayed in text mode and other graph modes.
3) Waveform Graph Mode – displays the parameters in waveform
graphs.
When this mode is applied, three control buttons will appear on the right
side of the parameter item, allowing you to manipulate the display status.
Text Button – resumes Text Display Mode.
Scale Button – changes the scale values, which are displayed below
the waveform graph. There are 4 scales available: x1, x2, x4 and x8.
Zoom-in Button – tap to display the selected data graph in full screen.
Edit Button – tap this button to open an edit window, on which
you can set the waveform color and the line thickness displayed
for the selected parameter item.
Scale Button - changes the scale values, which are displayed
below the waveform graph. There are 4 scales available: x1, x2,
x4 and x8.
Zoom-out Button – exits full screen display.
4) Digital Gauge Mode – displays the parameters in form of a digital
gauge graph.
Full Screen Display – this option is only available in the waveform graph
mode and mostly used in Graph Merge status for data comparison.
There are three control buttons available on the top right side of the
screen under this mode.
Loading ...
Loading ...
Loading ...