GE - General Electric PB976DN1BB GE electric range

User Manual - Page 40

For PB976DN1BB.

PDF File Manual, 44 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Beforeyoucall forservice...
Troubleshooting tips
Possible Causes What ToDo
Clock and timer do Plug on range is not completely Make sure electrical plug is plugged into a live, properly
not work inserted in the electrical outlet, g_ounded outlet.
A fuse in your home Replace file fi_se or reset file circuit breakeL
may be blown or the
circuit breaker tripped.
Oven controls improperly set. See the Using the clock and timer section.
Oven will not self-clean The oven temperature is Allow the range to cool and reset the controls.
too high to set a self-clean
operation.
Oven controls improperly set. See the Using the self-cleaning oven section.
The probe is plugged into Remove the probe flom the oven.
the outlet in the oven.
(on some models)
"Crackling" or This is the sound of the This is normal.
"popping" sound metal heating and cooling
during both the cooking and
cleaning functions.
Excessive smoking Excessive soil. Touch the CLEAR/OFFpad. Open the windows to
during a clean cycle rid the room of smoke. ¼rait until LOCKEDgoes off\
Wipe up the excess soil and reset the clean cycle.
Oven door will not Oven too hot. Allow the oven to cool below locking temperature.
open after a clean cycle
Ovennot clean after a Oven controls not properly set. See the Using the self-cleaning oven section.
clean cycle Oven was heavily soiled. Clean up heax T spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
"LOCKED"flashes The self-clean cycle has been (;lose the oven dooL
in the display selected but the door is not
closed.
"LOCKED"is on The oven door is locked Touch the CLEAR/OFFpad. Allow the oven to cool.
when you want because the temperature
tO COOk inside the oven has not
dropped below the
locking temperature.
"F--anda number You have a function error code. Disconnect all power to the range for at least 30
orletter"flash seconds and then reconnect power. If the flmcfion
in the display error code repeats, call for service.
4O
Loading ...
Loading ...
Loading ...