Loading ...
Loading ...
Loading ...
G
If the unit does not perform properly when operated as instructed in this Ow 1el s Manual, check the unit, con-
suiting tile following checklist.
PROBLEM
No power
No operation by infrared remote
control
CORRECTIVE ACTION
,, Make sure the power plug is connected to an AC outlet.
,, Make sum the power is turned on.
,, Check if tlle power plug is connected to an AC outlet.
,, Check the batteries in the remote control.
• Aim the remote control directly at the remote sensol: If necessary,
remove all tile obstacles between the sensor and tile remote control.
,, You have to be within 23 feet of the unit.
®Check if the correct mode is selected. If not switch the mode by
hiuing [SELECT], whichever you need.
ITV/VCR Model
Sometimes a perform_ulce problem can be easily solved by checking seemingly apparent but often overlooked
possibilities. BeR)re arranging R)r sel-vice, check these items. It could save your time and money.
CORRECTIVE ACTION
• Make sure the AC cord is connected to an AC outlet.
,, Check antenna connection.
• Hit [SELECT] to select TV mode.
Then tU other TV feature.
• Let the unit program its tuner memo U.
No picture or poor picture on the ,, Adjust direction or replace antenna.
unit _,Adjust picture controls.
®Check for broken pin of the gmtenna cable.
No sound or poor sound * Adjust volume control on remote control or main unit.
• Hit [MUTE] to restore sound.
Bars On Screen * If outside antenna is being used, check for broken wire.
• Check for local interference.
Picture Distorted or Blurred _,Try a new channel, if OK, then possible station trouble.
,, If outside _mtenna is being used, check for broken wire.
Picture Rolls Vertically _,Try a new channel, if OK, then possible station trouble.
Lines or Streaks in Picture * If outside antenna is being used, check for broken wire.
• Check for local interference.
No Color * Try a new channel, if OK, then possible station trouble.
• Is gmtenna connected to jack on tile back of the set'?
• If outside gmtenna is being used, check for broken wire.
• Adjust "COLOR" control.
Poor Reception on Some Channels * Try a new channel, if OK, then possible station trouble.
Ghosts in Picture * Is antenna connected to jack on the back of the set'?
_,If outside gmtenna is being used, check for broken wire.
®Check for local interference.
Weak Picture ,, Try a new channel, if OK, then possible station trouble.
• Is mltenna connected to jack on the back of the set'?
_,If outside matenna is being used, check for broken wire.
• Adjust "CONTRAST" & "BRIGHT" control.
Sound OK, Picture Poor ,, Try a new channel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set'?
• If outside antenna is being used, check for broken wire.
,, Check for local interference.
• Adjust "CONTRAST" & "BRIGHT" control.
- 46 - EN
PROBLEM
No picture or sound
Loading ...
Loading ...
Loading ...