Loading ...
Loading ...
Loading ...
A /TOM T <7; 0C£
Make sure...
® The unit must be tinned on.
• Confirm the unit is receiving a RF (Radio
Frequency) signal from either an antenna or cable
system connection using the ANT. jack on the rear
of the unit.
NOTES:
® If a cable converter box is being used, make sure it
is powered on.
• You must use the remote control to perform the
clock setting wocedure.
• If the unit is connected directly to a cable conveller
box or satellite box, the local PBS station must be
selected on the cable box itself and the unit must
be set to the output channel of the cable conveller
box or satellite box (usually channel 3 or 4), to be
able to set up or correct the clock automatically.
Seec S{!!TY'NG CLOC{< _
Hit [SETUP]. •...........
• IMER PROGRAMMtNa
SETTING CLOCK
Press [_, / 'V] to select ............
USEWS SET UP
"SETTING CLOCK", then hit ........._u__,%ou,_
CAPTION
[ENTER] ....... b%T
• •_MESeAnCH
INDEX SEARCH
52 S;e AUK> CLOCK o[ON}
Hit [ENTER] to select [ONI.
3 Beg AUK) CLOCK ©, S_ARCb
Hit [_'] to select "AUTO CLOCK ............
CH SEARCH". ........ io_l
AU•O CLOCK OH SEARCH
Then hit [ENTER]. _.......... t<
_, The unit begins searching for the ..............
station which contains the auto °_' Eo<
clock set signal. The search for a
signal may take up to 20 seconds per channel.
• When the search has ended, " ( .................
_" appears at the lower left ofthe ......
screen.
_, Write down the number(s) that
appear on the screen. They are
the auto clock station(s) in your area.
,, If no number(s) appear on the TV screen, there are
no stations in your area which contain the Auto
Clock signal. Auto Clock Setting is not possible.
Please use Mgmual Clock Setting on page 18.
NOTE:
,, During AUTO CLOCK CH SEARCH, the picture
may be distorted.
,_ Ester _he eha>_e r_mbe_ sa_ oo_s2am:;he
Aulo'_a e Cock Sets{# S {_a
Hit [RETURN] to go back to "SETTING CLOCK"
menu.
Hit IT] to select "AUTO CLOCK ( ............
Press ['_ / _] until you locate Auto [ o,_, Eo<
Clock Set station number. <
{'57 Ex lhese( ngcockmode
Hit [SETUP] to exit the menu.
NOTE:
® Once the unit is turned off, it will periodically
check and set the correct date and time.
[TV/VCR]
Select this feature and the unit's clock automatically
will advance one hour in April, then reverse one hour
in October.
When Daylight-Saving Time is ON, the clock will
change automatically as follows:
® First Sunday of April : At 2 AM the clock hnme-
diately ch_mges to 3 AM. Any timer programming
you have set to occur between 2 AM _md3 AM
will not record.
• Last Sunday of October : At 2 AM the clock
immediately ch_mges to 1 AM.
Make sure ...
• The unit must be turned on.
]_' Seec ©L,<)OK _ •..........
• IMER pROGRAt,4Mfiq@
Hit [SETUP]. _ ...........
CHANNEL SET Up
USEW8 SET UP
Press [J, / 'V] to point to "SETTING ...........LANGUAGE {ENGLISH]
CAPTION [OFF]
CLOCK", then hit [ENTER]. •,ME•........._E.,,_o.
_NDE× SEAlqCH
2 Set DSW (©sy{ght,Sav'_gTme}t>[ON]
Press [_. / T] to point to "D.S.T.', ( ............ "]
then hit [ENTER] until [ONI [,. ......... _o_ t
AU•© CLOCK GH SEARCH
appears. _o•oo_oo_o. _0_1
MANUAL CLOCK S_T ....
,/,i£Ext the Day ghtSsv_;gTme mode
Hit [SETUP] to exit the menu.
']7"} (APe'&EL ']_'( &,_YL 6'HT:d/A$C?u<'/
7k;fE
Repeat steps 1 to 2 and select [OFFI using
[ENTER].
19 EN
Loading ...
Loading ...
Loading ...