Loading ...
Loading ...
Loading ...
[TV/VCRI
Make sure ...
• The unit must be turned on.
If the erase-prevention tab llas been removed, the
unit will stari playback automatically.
[
Hit [PLAY [>].
.... _o y ........... (sTop
Hit [STOP II].
NOTES:
® Even in the DVD mode, you can start the VCR
playback if you hit [PLAY [>] (of the TV/VCR
side).
'_ VCR playback will stop mid the mode will change
to the DVD mode by pressing [SELECT],
[PLAY [>] (DVD side) or [OPEN/CLOSE _].
[TV/VCR 1
,_ Tracking adjustment will be set automatically
(Digital Tracking function) when you start play-
back.
• Noise lines (black and white streaks) may appear
on the playback picture when playing pre-recorded
tapes or tapes recorded on other VCR. If this
occurs, press [CH. _, / V] until the streaks disap-
pear.
• You can reduce the noise lines by pressing
[CH. _, / V] in the slow mode too. Tracking
adjustment in the slow mode will not be set auto-
matically.
,_ To return to the Digital Auto Tracking function,
stop the tape once gradstart playback.
[TV/VCR
Hit [PAUSE ||], then hit [ll_!_] to start the playback
in slow motion. The unit mutes the sound during
slow motion. Hit [PLAY [>] to return to normal
playback.
NOTE:
® If it is left in the slow mode for more than 5 min-
utes, the unit will automatically go into the stop
mode.
[TV/VCR
You can view a still picture on the TV screen during
playback (the still mode). Hit [PAUSE 1|] during
playback. Only tapes recorded in the SLP mode will
show the least amount of lines. Hit [PLAY [>] to
return to playback.
NOTES:
,_ You can adwmce the picture one frame at a time by
hitting [PAUSE |l] during the still mode.
,_ If it is left in the pause mode for more thml 5 min-
utes, the unit will automatically switch to the stop
mode.
[TV/VCR
In the pause/still mode only, when the picture begins
to vibrate vertically, stabilize the picture by pressing
[CH. A / v].
NOTE:
,_ If there are video noise lines on the screen, refer to
TRACKING ADJUSTMENT on this page.
25 EN
Loading ...
Loading ...
Loading ...