Loading ...
Loading ...
Loading ...
44
screen displays the toolbar buttons.
2. Main Section
Name Column – this column displays the parameter names.
a) Check Box – taps the check box at the left side of the
parameter name to make selection of an item. Tap the check
box again to deselect the item.
b) Drop-down Button – tapping the drop-down button at the right
side of the parameter name opens a submenu, which provides
various choices for data display mode.
Value Column – displays the values of the parameter items.
Range Column – displays the minimum and the maximum limit value.
Unit Column – displays the unit for the parameter values.
To change the Unit mode, tap the Setting button on the top toolbar
and select a required mode. See 8.1.1 Unit on page 78 for more
information.
3. Display Mode
There are 4 types of display modes available for data viewing, allowing
you to view various types of parameters in the most suitable way for better
data check-ups.
Tapping the drop-down button on the right side of the parameter name
opens a submenu. There are 4 buttons to configure the data display mode,
plus one Help button on the right, tappable when additional information is
available for your reference.
Each parameter item displays the selected mode independently.
Analog Gauge Mode – displays the parameters in form of an analog
meter graph
Text Mode – this is the default mode which displays the parameters in
texts and shows in list format.
NOTE: Reading of status parameters, such as a switch reading, which
are mostly in word form, like ON, OFF, ACTIVE, and ABORT, etc., can
only be displayed in Text Mode. Whereas reading of value parameters,
such as a sensor reading, can be displayed in text mode and other graph
modes.
Loading ...
Loading ...
Loading ...