Loading ...
Loading ...
Loading ...
24
power supply input port on the device.
2. Connect the male connector of the cigarette lighter into the vehicleβs
cigarette lighter receptacle.
ο To connect the clipper cable β for MaxiCOM MK908P only
1. Connect the tubular plug of the clipper cable to the male connector
of the cigarette lighter.
Figure 4-1 Connection between Cigarette Lighter and Clipper Cable
2. Plug the DC power connector of the cigarette lighter into the DC
power supply input port of the J2534 programming device.
3. Connect the clipper cable to the vehicleβs battery.
NOTE: After the VCI device is successfully connected to the vehicle, the Power
LED on the device illuminates, and a brief beep sound will be heard.
4.1.2 VCI Connection
After the VCI device is properly connected to the vehicle, the Power LED on
the VCI device illuminates solid green light, and is ready to establish
communication with the MaxiCOM display tablet.
The Wireless Diagnostic Interface, which comes with the MaxiCOM tool kit,
supports 2 communication methods with the MaxiCOM display tablet: BT and
USB.
The J2534 ECU Programming Device, which comes with the MaxiCOM Pro
tool kit, supports 2 communication methods with the MaxiCOM display tablet:
BT, and USB.
Pairing Up via BT
Among all methods, BT pairing is recommended as the first choice for the
Loading ...
Loading ...
Loading ...