Loading ...
Loading ...
Loading ...
119
Chapter 18 Digital Inspection Operations
The Digital Inspection application configures the MaxiCOM Diagnostic Device to operate
as a digital video scope by simply connecting the tablet to a Digital Inspection Camera.
This function allows you to examine difficult-to-reach areas normally hidden from sight,
with the ability to record digital still images and videos, which offers you an economical
solution to inspect machinery, facilities, and infrastructure in a safe and quick way.
WARNINGS & IMPORTANTS:
Follow these instructions to reduce the risk of injury from electric shock,
entanglement and other causes and prevent tool damage.
Do not place the imager head and cable into anything or anywhere that may
contain a live electric charge or moving parts, which increases the risk of
electric shock or entanglement injuries.
Do not use the imager head cable to modify surroundings, clear pathways
or clogged areas.
When inspection is completed, carefully withdraw the imager head cable
from the inspection area.
The imager head cable were waterproof to a depth of 3m (10’), greater
depths may cause leakage into the imager head cable and cause electric
shock or damage the tool.
The working temperature of the imager head is between 32 °F (0 °C) and
113 °F (45 °C).
Check-Ups:
FOR AUTOMOBILES: Ensure the automobile is not running during
inspection. Metal and liquid under the hood may be hot. Don’t get oil or gas
on the imager head.
FOR PIPES: If you suspect a metal pipe could contain an electric charge,
have a qualified electrician to check the pipe before using.
FOR WALLS: For inspecting the inside walls, be sure to shut off the circuit
breaker to the whole house before using the tool.
WORK AREA: Ensure the work area has sufficient light.
Loading ...
Loading ...
Loading ...