Loading ...
Loading ...
Loading ...
115
desired voltage point. The voltage info is displayed in a small
reference box.
4. Tap and slide the time base reference line left or right to the desired
point.
5. Tap Start button on the top right side of the screen to activate the
scope.
16.5 Troubleshooting
If the MaxiScope is not communicating with the MaxiCOM display tablet, you
need to do the followings:
Check if the MaxiScope is properly connected to the MaxiCOM display
tablet through the supplied USB cable.
If the MaxiScope is already connected to the MaxiCOM display tablet, but
the communication between the devices has failed, tap the Scope Icon
on the top right side of the screen to reset the USB connection.
IMPORTANT: All vehicle communications must be terminated before resetting
the USB connection to avoid damage to the devices and the vehicle. The
Internet connection may be aborted during USB reset.
If the communication between the MaxiScope and the MaxiCOM display
tablet still fails after USB reset, restart the MaxiCOM display tablet and
reconnect the MaxiScope.
16.6 MaxiScope Firmware Update
The operating software of the MaxiScope is continuously being developed, and
the update package can be downloaded freely from the MaxiScope product
webpage on Autel’s website: http://www.autel.com.
To update the MaxiScope firmware
1. Download the MaxiScope tool kit from our website www.autel.com >
Support & Updates > UPDATE CLIENT to the computer. The
installation wizard will load momentarily.
2. Click on Next on the welcome page.
3. Click the Browse button, and select a destination folder to install the
program, and click Next to continue. Or directly click Next to
continue without changing the default installation folder.
Loading ...
Loading ...
Loading ...