Loading ...
Loading ...
Loading ...
10
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions – All the safety and operating instructions should be
read before this product is operated.
2) Keep these instructions – The safety and operating instructions should be
retained for future reference.
3) Heed all warnings - All warnings on the appliance and in the operating
instructions should be adhered to.
4) Follow all instructions – All operating and use instructions should be followed.
5) This apparatus can be used in wet location conditions after disconnected the
AC Mains supply and closing the water proof cap for the AC inlet. It must not
be used in wet location conditions when charging. Do not use this apparatus
near water-The appliance should not be used near water or moisture – for
example, in wet basement or near a swimming pool.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiations, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding plug. A
polarized plug has two blades with one wider than the other. A grounding plug
has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protected the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart
or rack is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lighting storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15) Mains plug is used as the disconnect device, the disconnect device shall
remain readily operable.
16) Do not install this equipment in a confined or building-in space such as a book
case or similar unit, and remain a well ventilation conditions at open site. The
ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloth, curtains, etc.
17) No naked flame sources, such as lighted candles, should be placed on the apparatus.
18) Attention should be drawn to the environmental aspects of battery disposal.
19) The use of apparatus in moderate climate.
20) The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the apparatus.
Extension Cord Warnings:
1) Keep all electrical cords in good condition. Do not use worn, bare, or frayed
cords, which can cause electrical shock when RR4 is connected to wall power.
2) If you must use an extension cord, use only grounded extension cords that are
rated for outdoor use and equipment with a third-wire ground.
3) Avoid using excessively long extension cords, which can cause voltage drops,
causing the cord to overheat.
4) When using long extension cords with RR4, use a heavier cord with a larger
wire size to reduce the voltage drop (the longer or thinner the cord, the greater
the voltage drop).
Outdoor Use & Care:
Though RR4 is water-resistant and able to tolerate splashing water, please review the
tips below to get the best performance from RR4:
1) RR4 must only be used outdoors with power outlets or extension cords that are
rated for outdoor use.
2) Bring RR4 indoors during extreme weather.
3) Please do not place RR4 in standing water.
4) Please do not connect the power cable to RR4 in a wet environment. Make sure
the power input, power cable, and power outlet are all completely dry before
making any connections.
5) RR4 is Fitted with Wheels for extreme portability. For longevity of wheels please
ensure you clean the wheels with a dry brush and keep them free from mud, sand
and heavy soiling and avoid leaving soaked in water. Lubricate using bearing oil if
wheels become noisy or have diculty turning.
6) WARNING: Keep any non-water-resistant devices (phones, music players, etc.) in a
dry place where they will not be aected by water and cause a risk of electric shock.
Loading ...
Loading ...
Loading ...