Loading ...
Loading ...
Loading ...
www.S ereneLifeHome.com
11
If the running belt is shifting to the right, then turn the right adjustment bolt 1/4 turn clockwise, and the
belt should start to correct itself. Keep turning the adjustment bolts until the running belt is properly
centered.
If the running belt is slipping during use, turn o and unplug the treadmill. Using the 6 mm Allen Wrench
provided, turn both left and right rear roller adjustment bolts 1/4 turn clockwise, then turn the main power
switch back on and run the treadmill at a speed of 5-6 MPH. Run on to the running belt to determine if the
belt is still slipping. Repeat this procedure until the belt no longer slips.
CARE, MAINTENANCE & TROUBLESHOOTING GUIDE
WARNING: To prevent electrical shock, please turn o and unplug the treadmill before cleaning or
performing routine maintenance.
WARNING: Always check the wear and tear components like foot lock latch tube and running belt to
prevent injury.
CLEANING
After each exercise, ensure that the unit is wiped down and any sweat is removed from the unit.
The treadmill can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents.
Be careful not to get excessive moisture on the display panel as this might damage the unit and create an
electrical hazard. Please keep the treadmill, especially the computer console, out of direct sunlight to
prevent damage to the screen.
STORAGE
Store the treadmill in a clean and dry indoor environment. Never leave or use the unit outdoors.
Ensure the master power switch is o and the power cord is un-plugged from wall outlet.
Allen Wrench
Tool:
Allen Wrench
Tool:
Loading ...
Loading ...
Loading ...