Loading ...
Loading ...
Loading ...
www.S ereneLifeHome.com
10
LUBRICATION
Lubricating under the running belt will ensure superior performance and extend its life expectancy.
After the rst 25 hours of use (or 2-3 months) apply some lubricant, and repeat for every following 50
hours of use (or 5-8 months).
How to check running belt for proper lubrication
• Lift one side of the running belt and feel the top surface of the running deck.
• If the surface is slick to the touch, then no further lubrication is required.
• If the surface is dry to the touch, apply some lubricant.
How to apply lubricant
• Lift one side of running belt.
• Pour some lubricant under the centre of the running belt on the top surface of the running deck.
• Run on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
NOTE:
DO NOT over lubricate running deck. Any excess lubricant that comes out should be wiped o.
BELT ADJUSTMENT
The running belt is pre-adjusted to the running deck at the factory, but after prolonged use it can stretch
and require readjustment. To adjust the belt, turn on the main power switch of the treadmill and let the
belt run at a speed of 5-6 MPH. Use the Allen Wrench provided to turn the rear roller adjustment bolts in
order to centre the belt. If the running belt is shifting to the left, turn the left adjustment bolt 1/4 turn
clockwise, and the running belt should start to correct itself.
Lubricant
1 PC
Allen Wrench
Tool:
Loading ...
Loading ...
Loading ...