Dji GOGGLES INTEGRA User Manual

Loading ...

DJI Goggles Integra Motion Combo User Manual

The ying speed controlled by the joystick and the accelerator can be congured

as below:

1. Press down the 5D button to open the menu from the FPV view

2. Select

Settings > Control > Motion Controller > Gain Tuning

, then set the

maximum speed in each direction.

Controlling the Camera

Shutter/Record Button

FN Dial

Adjusting the camera parameters: press the dial to open the camera settings panel from

the FPV view of the goggles. Scroll the dial to navigate the settings menu or adjust the pa-

rameter value, then press the dial to conrm the selection. Press and hold the dial to exit

the current menu.

Controlling the camera tilt: before takeo or during RTH and landing, press and hold the

dial from the FPV view and then scroll up or down to tilt the camera. Release the dial to

stop the camera tilt.

Adjusting the zoom in Explore Mode: if the aircraft supports Explore Mode and Explore

Mode is turned on, scroll the dial on the goggles FPV view to adjust the camera zoom.

Shutter/Record Button

Press and hold to switch between the photo and video modes. Press once to take a photo

or to start or stop recording.

Loading ...

Dji GOGGLES INTEGRA