Loading ...
Loading ...
Loading ...
Page 8
UPPER PANEL
SCREWUPPER PANEL
1. Aligh the screw sleeves of the front panel
with the screw holes on the upper handle.
2. Tighten them with a Phillips screwdriver
(not included).
SPRAY GUN HOLDER
SCREW
SPRAY GUN HOLDER
1. Aligh the screw sleeves of the spray gun
holder with the screw holes on the upper
handle.
2. Tighten them with a Phillips screwdriver
(not included).
ASSEMBLY
UNPACKING
This product requires assembly.
• Carefully remove the product and any
accessories from the box.
• Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
• Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the product.
• If any parts are damaged or missing, please
call 1-844-MSTR4CE (844-678-7423) for
assistance.
ELECTRICAL CONNECTION
This machine has a precisely built electrical
motor. It should be connected to a power
supply that is 120V, 60 Hz, AC only
(household). Do not operate this machine on
direct current (DC). A considerable voltage
drop will cause a loss of power and the motor
will be overheated.
PREPARE A DRIP LOOP
Recommend the use of a drip loop as below
so the water can not run along the power cord
even possibly reach the electrical outlet and
plug.
Keep the extension
cord clear of the
working area. Position
the cord so that it will not get caught on lumber,
tools, or other obstructions while you are
working with a power tool. Failure to do so can
result in serious personal injury.
WARNING
FIG. 1
FIG. 2
FIG. 3
Loading ...
Loading ...
Loading ...