Masterforce 5100094VT 3000 PSI 2.0 GPM 15-Amp Corded Electric Pressure Washer

Operator's Manual - Page 6

For 5100094VT.

PDF File Manual, 23 pages, Read Online | Download pdf file

5100094VT photo
Loading ...
Loading ...
Loading ...
Page 5
Replace damaged cords immediately.
Damaged cords increase the risk of
electric shock.
Inspect extension cords periodically and
replace if damaged. Keep handles dry,
clean, and free from oil or grease.
PRESSURE WASHER SAFETY
WARNINGS
Read all the instructions before using the
product.
To reduce the risk of injury, close
supervision is necessary when a product
is used near children.
Know how to stop the product and bleed
unit pressure quickly. Be thoroughly
familiar with the controls.
Stay alert – watch what you are doing.
Do not operate the product when fatigued
or under the inuence of alcohol or drugs.
Keep operating area clear of all persons.
Do not overreach or stand on unstable
support. Keep good footing and balance at
all times.
Follow the maintenance instructions
specied in the manual.
This product is provided with a ground fault
circuit interrupter built into the power cord
plug. if replacement of the plug or cord is
needed, use only identical replacement
parts.
Risk of injection or injury– Do not direct
discharge stream at persons.
Keep the motor away from flammables and
other hazardous materials.
Keep product dry,
clean, and free
from oil and grease. Always use a clean
cloth when cleaning. Never use br
ake
flui
ds, gasoline, petroleum-based products,
or any solvents to clean product.
To reduce the risk of electrocution, keep all
connections dry and off the ground. Do not
touch plug with wet hands.
SAFETY INSTRUCTIONS
GROUND FAULT CIRCUIT
INTERRUPTER PROTECTION
This pressure washer is provided with a
ground-fault circuitinterrupter (GFCI) built
into the plug of the power-supply cord.
This device provides additional protection
from the risk
of electric shock. Should
replacement of the plug or cord become
necessary, use only identical replacement
parts that include GFCI protection.
SERVICING OF A
DOUBLEINSULATED
APPLIANCE
In a double-insulated product, two
systems of insulation are provided instead
of grounding. No grounding means is
provided on a double-insulated product,
nor should a means for grounding be
added to the product. Servicing a double-
insulated product requires extreme
care and knowledge of the system, and
should be done only by qualified service
personnel. Replacement parts for a double-
insulated product must be identical to
the parts they replace. A doubleinsulated
product is marked with the words “DOUBLE
INSULATION” or “DOUBLE INSULATED.
EXTENSION CORDS
Use only extension cords that are intended
for outdoor use. These extension cords
are identied by a marking “Acceptable for
use with outdoor appliances; store indoors
while not in use.” Use only extension cords
having an electrical rating not less than the
rating of the product. Do not use damaged
extension cords. Examine extension cord
before using and replace if damaged.
Do not abuse extension cord and do not
yank on any cord to disconnect. Keep
cord away from heat and sharp edges.
Always disconnect the extension cord from
the receptacle before disconnecting the
product from the extension cord.
WARNING
Loading ...
Loading ...
Loading ...