Loading ...
Loading ...
Loading ...
Page 13
MAINTENANCE
Before maintenance, make sure that you
• Stop the machine.
• Wait until all the moving parts stop.
• Disconnect the plug from the power source.
Do not use strong solvents or detergents on
the plastic housing or components.
Do not let brake fluids, gasoline, petroleum-
based materials touch the plastic parts.
Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Replace the power cord by an approved
service center.
SPRAY TIP MAINTENANCE
Remove the spray tip
1. Pull back the quick-connect collar on the
spray wand.
2. Remove the spray tip from the spray
wand.
Clean the spray tip
1. Use a straight paper clip or cleaning tool
to clean the spray tip.
2. Flush and clean the unwanted materials
out of the spray tip with the garden hose.
3. Install the clean spray tip (18) back into
the spray wand.
TRANSPORTATION AND
STORAGE
Disconnect the
power cord and
watter supply hose before transportation and
storage.
Move the machine
• Point the spray wand in a safe direction.
• Only hold the machine with the handgrip.
Store the machine
Make sure that the
spray gun, the high pressure hose and the
pump are dry.
WARNING
WARNING
WARNING
Make sure the machine is out of the reach of
children.
NOTE: Use a recommended pump protector
to prevent cold weather damage during
storage in winter.
• Disconnect the garden hose from
machine.
• Wind the power cord and the high
pressure hose.
• Clean housing and the plastic
components with a moist and soft cloth.
• Make sure that the machine does not have
loose or damaged parts. If it is necessary,
follow these steps/instructions:
• Replace the damaged parts.
• Tighten the bolts.
• If needed, call the customer service
phone number (enter number here) for
servicing instructions.
• Store the machine in a dry, isolated and
frost-free area.
Loading ...
Loading ...
Loading ...