Loading ...
Loading ...
Loading ...
Page 10
There must be a
minimum of 10 feet
of free hose between the water inlet and the
water supply.
USE THE SPRAY GUN
For safe control,
keep your hands on
the spray gun at all times.
TRIGGER
LOCK-OUT
BUTTON
1. Pull and hold the spray gun trigger to start
the machine.
2. Release the spray gun trigger to stop water
flow through the spray tip.
Unlock the spray gun trigger
1. Push the trigger safety lock-out button down
until it clicks into the slot.
Lock the spray gun trigger
1. Push the trigger safety lock-out button up
and into it's original position.
Make sure that all the
connections are tight
and have no leakage before operation.
CONNECT THE WATER SUPPLY
TO THE MACHINE
For easy operation, please use a self-coiling
garden hose (not provided).
When you operate
the self-coiling hose,
make sure that the hose has no blockage.
• The water supply must come from the water
main.
• Do not use hot water.
• Do not use water from ponds or lakes.
Always observe all the local regulations when
you connect the garden hose to the water
supply. Direct connection through a receiver
tank or backow preventer is usually permit-
ted.
Inspect the lter in
the water inlet con-
nector before you connect the garden hose.
• If the lter is damaged, do not use the
machine until the lter is replaced.
• If the lter is dirty, clean the lter.
HIGH
PRESSURE
HOSE
WATER
INTLET
1. Uncoil the garden hose.
2. Let the water flow through the garden hose
for 30 seconds.
3. Turn the water supply off.
4. Install and tighten the end of the garden
hose to the water inlet connector.
OPERATION
FIG. 6
FIG. 1
FIG. 2
WARNING
CAUTION
CAUTION
WARNING
WARNING
Loading ...
Loading ...
Loading ...