Loading ...
Loading ...
Page 2
SAFETY SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better
and safer.
Symbol Name Designation / Explanation
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
Class II Construction Double-insulated construction.
/min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Safety Alert Precautions that involve your safety.
Read The Operator’s
Manual
To reduce the risk of injury user must read and understand
operator’s manual before using this product.
Eye Protection
Always wear eye protection with side shields marked to
comply with ANSI Z87.1 when operating this equipment.
Risk of Injection
To reduce the risk of injection or injury, never direct a water
stream towards people or pets or place any body part in
the stream. Leak ing hoses and ttings are also capable of
causing injection injury. Do not hold hoses or ttings.
Kickback
To reduce the risk of injury from kickback, hold the spray
lance securely with both hands when the machine is on.
Electric Shock
Failure to use in dry conditions and to observe safe
practices can result in electric shock.
Risk of Explosion
Fuel and its vapors are explosive and can cause severe
burns or death.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Chemical Burns
To reduce the risk of injury or damage, DO
NOT USE ACIDS, ALKALINES, BLEACHES,
SOLVENTS, FLAMMABLE MATERIAL, OR
INDUSTRIAL GRADE SOLUTIONS in this product.
Loading ...
Loading ...
Loading ...