Loading ...
Loading ...
Loading ...
Page 12
ADD DETERGENT
Do not use
household
detergents, acids, alkalines, bleaches,
solvents, flammable material, or industrial
grade solutions, which can do damage to the
pump.
Read the instructions on the solution bottle to
prepare detergent.
NOTE: f it is necessary, use a funnel to
prevent the spill of detergent. Clean and dry
the spilled detergent when you ll the tank.
NOTE: Soap/detergent can only be applied
with this machine when the black nozzle(75
degree) is installed.
DETERGENT
TANK
1. Place the pressure washer upright on a flat
surface.
2. Open the cap on the detergent tank.
3. Pour detergent into tank.
4. Reinstall cap.
NOTE: Do not let detergent dry on the surface
to prevent streaks.
START THE MACHINE
Do not operate
without the water
supply connected.
Before you start the
machine:
1. Turn the water supply on.
2. Pull the gun trigger to release air pressure.
3. If a stable stream of water come into view,
release the spray gun trigger.
OPERATION
FIG. 4
ON/OFF SWITCH
1. Connect the machine to the power supply.
2. Press down on the ON/OFF switch once to
set the power switch to the "ON" ( | )
position.
3. Turn the water supply on.
4. Pull the spray gun trigger.
STOP THE MACHINE
1. Release the spray gun trigger.
2. Press down on the ON/OFF switch, once
again, to set the power switch to the "OFF"
(O) position.
If you do not use the
machine:
• Stop the machine.
• Turn the water supply off.
• Disconnect the power cord from the outlet.
• Pull the spray gun trigger to release the
remaining pressure from the machine.
• Engage the trigger safety lock-out on the
spray gun.
THERMAL RELIEF VALVE
FUNCTION
The thermal relief valve is a thermal protector
for the pressure washer pump. This pump
feature will prevent water temperatures from
reaching harmful levels by releasing a small
amount of water. Opening temperature is
140°F. The valve will reset automatically once
the pump relives.
WARNING
WARNING
FIG. 4
CAUTION
CAUTION
FIG. 5
Loading ...
Loading ...
Loading ...