Loading ...
Loading ...
Loading ...
TP-7092 2/2120 Section 1 Descriptions and Service Views
1.8.8 Breather Tube Heater and Oil
Heater Kit
The breather tube heater and oil heater kit is
recommended for improved cold starting in locations
where the ambient temperature drops below 0C
(32F).
Note: The heaters require a continuous source of AC
power. See Figure 12 and Figure 13 for the
power supply voltage required.
Note: The breather tube heater and oil heater must be
used together.
Verify that AC power is connected to the generator set
as described in the generator set Installation Manual.
The circuit must be backed up by the generator set to
provide power at all times. Refer to TT- 1709 for
instructions to install the heaters and connect 120VAC
power.
See Figure 14 and Figure 15 for illustrations of the
120VAC breather tube heater and oil heater.
Heater Part Number GM110893, GM110894
Voltage 120VAC
Thermostat ON 4C (40F)
Thermostat OFF 13C (55F)
Figure 12 Breather Tube Heater Specifications
Heater Part Number GM110895, GM110896
Voltage 120VAC
Thermostat ON
4C (40F)
Thermostat OFF
13C (55F)
Figure 13 Oil Heater Specifications
1
1. Heating element
2. Thermostat
3. 120VAC female connector (connect to oil heater)
4. Label
5. 120VAC plug
3
4
2
5
Figure 14 Breather Tube Heater
1
1. Heating element
2. Heating probe
3. Thermostat
4. Label
5. 120VAC male connector (connect to breather tube heater)
3
4
5
2
GM101483
Figure 15 Oil Heater
Loading ...
Loading ...
Loading ...