Loading ...
Loading ...
Loading ...
TP-7092 2/2116 Section 1 Descriptions and Service Views
RDC2 Controller Features
Six-button keypad
OFF, AUTO, and RUN pushbuttons
Select and arrow buttons for access to system
configuration and adjustment menus
LED indicators for OFF, AUTO, and RUN modes
LED indicators for utility power and generator set
source availability and ATS position (Model RXT
transfer switch required)
LCD display
Two lines x 16 characters per line
Backlit display with adjustable contrast for
excellent visibility in all lighting conditions
Scrolling system status display
Generator set status
Voltage and frequency
Engine lube oil temperature
Oil pressure
Battery voltage
Engine runtime hours
Date and time displays
Smart engine cooldown senses engine temperature
Digital isochronous governor to maintain
steady-state speed at all loads
Digital voltage regulation: ±0.5% RMS no-load to
full-load
Automatic start with programmed cranking cycle
Programmable exerciser can be set to start
automatically on any future day and time, and run
every week or every two weeks
Exercise modes
Unloaded cycle exercise with complete system
diagnostics
Unloaded full-speed exercise
Loaded full-speed exercise (Model RXT ATS
required)
Front-access mini USB connector for Kohler
SiteTech connection
Integral Ethernet connector for the Kohler OnCue
Plus Generator Management System
Built-in battery charger
Remote two-wire start/stop capability for connection
of Model RDT or other transfer switches
Diagnostic messages
Displays diagnostic messages for the engine,
generator, Model RXT transfer switch,
programmable interface module (PIM), and load
management device
Over 70 diagnostic messages can be displayed
Maintenance reminders
System settings
System voltage, frequency, and phase
Voltage adjustment
Measurement system, English or metric
ATS status (Model RXT ATS required)
Source availability
ATS position (normal/utility or
emergency/generator)
Source voltage and frequency
ATS control (Model RXT ATS required)
Source voltage and frequency settings
Engine start time delay
Transfer time delays
Voltage calibration
Fixed pickup and dropout settings
Programmable Interface Module (PIM) status
displays
Input status (active/inactive)
Output status (active/inactive)
Load control menus
Load status
Test function
Loading ...
Loading ...
Loading ...