Lexmark MS817DN User's Guide PDF Lexmark MS810, MS811, MS812, MS817, MS818

Loading ...

For non‑touch‑screen printer models, press and on the control panel simultaneously for 15 seconds

to clear the message and continue printing.

If you do not want to accept these risks, then remove the third-party supply or part from your printer and

install a genuine Lexmark supply or part.

Note: For a list of supported supplies, see the “Ordering supplies” section or go to

www.lexmark.com.

Not enough free space in

ﬂash

memory for resources [52]

Try one or more of the following:

• From the printer control panel, select Continue to clear the message and continue printing. For

non‑touch‑screen printer models, press

to conﬁrm.

• Delete fonts, macros, and other data stored in the ﬂash memory.

• Upgrade to a larger capacity ﬂash memory card.

Note: Downloaded fonts and macros that are not previously stored in the

ﬂash

memory are deleted.

Paper changes needed

Try one or more of the following:

• Select Use current supplies on the printer control panel to clear the message and continue printing.

For non-touch-screen printer models, press

to conﬁrm.

• Cancel the current print job.

Parallel port [x] disabled [56]

Try one or more of the following:

• Select Continue to clear the message. For non-touch-screen printer models, press to

conﬁrm.

The printer discards any data received through the parallel port.

• Select Reset active bin to reset the bin for a linked set of bins.

Printer had to restart. Last job may be incomplete.

Select Continue on the control panel to clear the message and continue printing. For non‑touch‑screen

printer models, press

to conﬁrm.

For more information, go to

http://support.lexmark.com or contact customer support.

Troubleshooting 292

Loading ...

Lexmark MS817DN