PowerSmart PS5045 4500W Inverter Gas Generator

INSTRUCTION MANUAL - Page 22

For PS5045.

PDF File Manual, 30 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
22
SPARK ARRESTER
1. Allow the generating set to cool completely before servicing the spark arrester.
2. Remove the muffler blind window first.
3. Remove the spark arrester screen.
4. Carefully remove the carbon deposits from the spark arrester screen with a
wire brush.
5. Replace the spark arrester if it is damaged.
6. Reinstall the spark arrester in the muffler and reinstall the muffler blind
window.
STORAGE & TRANSPORT PROCEDURES
STORAGE
WARNING: Gasoline is highly flammable and extremely explosive. Empty the fuel tank and
shut off fuel valve before storing or transporting this generating set.
The generating set should be started at least once every 2 weeks and allowed to run for at
least 20 minutes. Follow the instructions below for longer term storage if the generating set will be out
of service for 2 months or more.
Allow the generating set to cool completely before storage.
Clean the generating set according to instruction in maintenance section.
Drain all fuel completely from the fuel tank, fuel hose and carburetor to prevent gum from forming.
Turn off the fuel supply at the fuel valve.
Change the oil.
Reattach the spark plug.
Remove the spark plug and pour about 15ml of oil into the cylinder.Crank the engine slowly to
distribute the oil and lubricate the cylinder.
Store the unit in a clean, dry area out of direct sunlight.
TRANSPORT
To prevent fuel spillage when transporting or during temporary storage, the generating set should
be secured upright in its normal operating position, with the engine switch OFF. The fuel valve lever
should be turned OFF.
When transporting:
Do not overfill the tank.
Do not operate the generating set while it is on vehicle. Take the generating set off the vehicle and
use it in a well-ventilated place. Avoid a place exposed to direct sunlight when putting the generating
set on a vehicle. If the generating set is left in an enclosed vehicle for many hours, high temperature
inside the vehicle could cause fuel to vaporize resulting in a possible explosion.
Do not drive on a rough road for an extended period with the generating set on a rough road, drain the
fuel from the generating set beforehand.
Loading ...
Loading ...
Loading ...