Loading ...
Loading ...
Loading ...
18
PARALLEL OPERATION
Make sure that the generating set is in a good running state before connecting it to other generating
sets. The total power of electric devices should not exceed rated power of generating set.
When electric motor starts, the overload indicator (red) will light up and normally it will stop within
4 seconds. If it cannot stop, please call (800) 791-9458 Mon-Fri 9-5 EST or
email: support@amerisuninc.com for customer service.
During parallel operation, energy-saving switches of generating sets should be in the same position.
To parallel operation, perform the following steps:
1. Connect one generating set to other generating set(s) in parallel. Use the parallel kit to make the
parallel connection (the parallel kit needs to be purchased separately).
2. Insert the plug of the parallel kit into the parallel socket on the panel, and start the generators in turn.
Make sure that the output indicator of each generator is in normal state (green).
3. Connect the plug of electric devices to the AC receptacle of parallel kit.
NOTE: When connecting, please connect the plug to the panel socket of the same color.
4. Run the electric devices.
CAUTION: The total power of electric devices cannot exceed the rated power of generating
set. The manufacturers of electric devices or tools always list the rated power of similar models
or serial number.
When slightly overload, the load indicator flashes continuously, which may shorten the service life of the
generating set. When severe overload, the load indicator light keeps on, which may cause damage to the
generating set.
STOPPING THE GENERATOR
WARNING:Never stop the engine with electrical devices connected and with the connected
devices turn “ON”.
1. Remove the connectors of all electric equipment from the generating set panel.
2. Turn the combination switch to “STOP” position, the generator stops operation.
MAINTENANCE
It is the operator’s responsibility to complete all scheduled maintenance in a timely manner. Correct any
issue before operating the generating set. Always follow the inspection and maintenance
recommendations and schedules in this manual.
WARNING: Improper maintenance or failure correct a problem before operation can cause a
malfunction and result in property damage, serious injury or DEATH. Improper maintenance
will void your warranty.
DANGER: Accidental starts can cause severe injury or death. Remove the spark plug cap and
ground generating set before performing any service.
WARNING: The filter element may contains PAHs, PAHs are harmful for your health. Please
wear gloves for protection during air filter maintenance.
Loading ...
Loading ...
Loading ...