Loading ...
Loading ...
Loading ...
21
5. Fully tighten the drain bolt before reinstalling the drain plug.
6. Add recommended oil to the upper limit.
7. Fully tighten the dipstick and install the air filter maintenance cover back in place.
8. Properly dispose of any used oil at an approved waste management facility.
AIR FILTER
WARNING: Do not run the engine without the air filter, or serious danger can result.
Routine maintenance of the air cleaner helps maintain proper airflow
to
the carburetor. Occasionally check that the air cleaner is free of
excessive dirt.
1. Remove the air filter maintenance cover.
2. Loose the filter fix clamp and remove the cover of the air filter.
3. Remove the foam filter element.
4. Wash in liquid detergent and warm water.
5. Squeeze thoroughly dry in a clean cloth.
6. Saturate in clean engine oil.
7. Squeeze in a clean , absorbent cloth to remove all excess oil.
8. Assemble the filter element onto the filter unit.
9. Assemble the filter fix clamp.
10. Reinstall the air filter maintenance cover.
SPARK PLUG
Spark plug gap : 0.6mm-0.8mm(0.024-0.031 in). Spark plug tighten torque: 15-20N.m
The spark plug is important for proper engine operation. A good spark plug should be intact, free of
deposits, and properly gapped. Refer to Recommended Maintenance Schedule. To inspect the spark plug:
1. Remove the maintenance cover of spark plug.
2. Remove the spark plug cap.
3. Using socket wrench to loose and remove the spark plug.
4. Inspect the spark plug and spark plug washer, if it was broken or worn,
replace with a new one.Clean the spark plug with wire brush if reuse it.
5. Check spark plug gap. Carefully bend side electrode to adjust the gap if
necessary.
6. Carefully thread the plug into the engine by hand.
7. After the spark plug is seated, use spark plug wrench to tighten the plug.
8. Attach the spark cap to the plug and connect the spark plug wire to the plug.
9. Install spark plug maintenance cover.
CAUTION: Only use recommended spark plug or equivalent. Do not use spark plugs that have improper
heat range.
Loading ...
Loading ...
Loading ...