Loading ...
Loading ...
Loading ...
Questions? Call Toll Free at 1-800-737-2112 Copyright © 2019 MAT Engine Technologies, LLC
ENG - 11
Operation (Continued)
• Save all instructions
How to Adjust the Vertical Flow Angle
F
2. The airflow can be directed up or down by loosening
the discharge nozzle wing knob and rotating the nozzle
in the desired direction. Tighten wing knob. (Fig. 15)
WARNING
Read the Operator’s manual. Know location and functions
of all controls. Keep all safety devices and shields in place.
Never allow children or uninstructed adults to operate the
blower. Keep bystanders away from machine. Keep away
from the fan intake opening and discharge chute, as the
fan is rotating and can cause severe injury.
• Blowing leaves is best performed when conditions are dry.
• To clear a very large and/or heavy pile of leaves, make
two passes: First point the directional adjustment
upward to move the top of the pile. Then point the
directional adjustment downward to move the base of the pile.
• When clearing leaves, always pay attention to natural
wind direction and blow the leaves the same direction as
the natural wind.
• To clear a small area, corral the leaves in the center by
circling several times around the perimeter of the area.
• To clear a large area, move the leaves from one side to
the other by making back and forth passes.
• Before starting a clearing project, plan how the leaves
will be collected and disposed.
• Check and clean air intake grille if leaves accumulate
and decreased performance is noticed.
• A drag chain is provided to dissipate any static charges
that may be generated during use. Be sure chain is
present and in contact with ground.
Tips for Using your Walk Behind Blower
G
Loading ...
Loading ...
Loading ...