Loading ...
Loading ...
Loading ...
INSTALLING YOUR FREESTANDING COOKER
8
INSTALLATION REQUIREMENTS
NOTE: This cooker must be installed by a qualified
installer in accordance with local regulations.
1. Make sure that there are no combustible or
flammable materials, such as curtains, in the
vicinity of the installation.
2. Furniture and cabinets surrounding the cooker
must be of a material resistant to temperatures
greater than 100°C.
3. Surrounding furniture, cabinets and extractor
fans should be positioned in accordance with
the diagram shown below.
4. There must be at least 2cm of free space
between the back wall and the rear of the
appliance to allow for ventilation and air
circulation.
5. If fitted, the extractor fan must be at least 65cm
above the hotplates. If no fan is fitted the
minimum distance between the hotplates and
any cabinet or other structure must be 75cm.
UNPACKING
Carefully unpack and examine the appliance for any
damage. If you think there is a defect, do not use
the appliance and contact Product Support on 0333
305 2261.
FIRST USE
IMPORTANT: When using your oven for the first
time your cooker may give off an unusual odour.
This is normal and is from the heating elements and
insulation materials. To eliminate this odour run the
oven at 250 degrees for 40-60 minutes with the
oven empty.
IMPORTANT: The top surface of the hotplates are
sealed with a heat resistant coating. Before using for
the first time the hotplates should be heated for a
short period without a pan to harden the protective
coating.
Turn the heat setting to maximum for approx. 3
minutes to fully harden the coating. When the
hotplates have cooled apply a thin coating of
cooking oil to the hotplate to seal and protect the
surface.
Loading ...
Loading ...
Loading ...