Loading ...
Loading ...
Loading ...
Configuring Training Alert
Settings
You can use the CASIO WATCHES phone
app to specify target alert intervals to inform
you of
your calories burned, elapsed time, and
distance traveled during training. Every time
an alert target value is reached during activity
measurement, a sound or vibration operation
is performed, and an alert screen appears to
notify you.
You can use a single watch operation to toggle
all the alerts you configured with the CASIO
WATCHES phone app between on and off.
●
To specify training alert target values
with the CASIO WATCHES phone app
Important!
●
Note that you cannot specify alert
target values using watch operations.
Use the
CASIO WATCHES phone app
to configure settings.
Check the connection
●
Make sure
the
e
symbol is shown on the
watch display when you perform the
procedure below. If
e
is not displayed,
refer to the information at the link below.
l
Connecting with a Phone Paired
With the Watch
1.
Y
Tap the “CASIO WATCHES
” icon.
2.
Y
Tap the “My Watch” tab.
3.
Y
Select “DW-H5600
” and tap it.
4.
Y
Select the setting you want to change
and then perform the operation shown on
the screen.
●
To enable training alert with the watch
1. Display the current time screen.
l
Watch Mode
2. Press (A).
This enters the Activity Mode.
Example:
3. Use (C) to select an activity.
4. Press (A).
This displays the measurement operation
ready screen.
5. Hold down (C) for at least two seconds.
This displays the activity measurement
setting screen.
Pointer
6. Use (C) to move the pointer to [TRAINING
ALERT].
7. Press (A).
8. Use (C) to move the pointer to [ON
].
●
If you want to disable training alerts,
move the pointer to [OFF].
9. Press (A) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then
the activity measurement setting
screen re-appears.
10. Press (D) to exit the setting screen.
Important!
●
Use the
CASIO WATCHES phone app
to specify an alert target value for each
item. You cannot use watch operations
to configure alert target value settings.
Note
●
While the setting is being configured,
the watch
will exit the setting operation
automatically after about two or three
minutes of non-operation.
Watch Operation Guide 3516
52
Loading ...
Loading ...
Loading ...