Loading ...
Loading ...
Loading ...
Operation Manual
77
Parameter Description
Default Gateway
●
IPv6 does not have subnet mask.
●
The default gateway must be in the same network segment with
the IP address.
Preferred DNS IP address of the preferred DNS.
Alternate DNS IP address of the alternate DNS.
Enable ARP/Ping to set
IP address service
Select the check box, get the camera MAC address, and then you can
modify and configure the device IP address with ARP/ping command.
This is enabled by default. During reboot, you will have no more than
2 minutes to configure the device IP address by a ping packet with
certain length, the server will be turned off in 2 minutes, or it will be
turned off immediately after the IP address is successfully configured.
If this is not enabled, the IP address cannot be configured with ping
packet.
A demonstration of configuring IP address with ARP/Ping.
1. Keep the camera that needs to be configured and the PC within
the same local network, and then get a usable IP address.
2. Get the MAC address of the camera from device label.
3. Open command editor on the PC and enter the following
command.
4. Restart the camera.
5. Check the PC command line, if information such as
Reply from
192.168.0.125…
is displayed,the configuration succeeds, and
you can turn it off then.
6. Enter http
://(IP address
) in the browser address bar to log in.
Step 3 Click
Save
.
Loading ...
Loading ...
Loading ...