Loading ...
Loading ...
Loading ...
Operation Manual
121
Table 4-43 Description of serial port settings parameters
Parameter Description
Address
The corresponding device address. It is 1 by default.
Make sure that the address is the device address; otherwise you cannot
control the device.
Baud Rate Select the baud rate for the camera. It is 9600 by default.
Date Bit It is 8 by default.
Stop Bit It is 1 by default.
Parity
It is
None
by default.
Step 3 Click
Save
.
4.8.5.2 External Light
You need to configure external light mode when the external light is used.
Prerequisites
●
Connect external light with RS-485 port.
●
You have configured serial port parameters. For details, see "4.8.5.1 Serial Port Settings".
Procedure
Step 1 Select
Setting
>
System
>
Peripheral
>
External Light
.
Figure 4-122 External light
Step 2 Configure external light work mode.
Loading ...
Loading ...
Loading ...