Loading ...
Loading ...
Loading ...
Operation Manual
196
Figure 5-83 Scene set (ANPR)
Step 2 Click
Draw
to draw a detect region and an exclude region in the image.
●
Detect region: The region that needs to be detected.
●
Exclude region: The region that does not need to be detected. Click
Modify
to modify
the drawn region.
Click
Clear
at the right side to draw the detection area again.
Step 3 Click
Draw Target
next to
Target Filter
to draw the maximum size and minimum size for
the detection target in the image.
Step 4 Configure parameters.
Table 5-23 Description of scene set parameters (ANPR)
Parameter Description
Traffic Flow Statistics
Select
Traffic Flow Stat
, and the device detects the number of
motor vehicles and non-motor vehicles in the detection area and
generates the statistical report. If
Traffic Flow Stat
is disabled,
the report has no statistical data.
Select
OSD
to display the statistical result on the preview
interface. To clear the statistical result, click
Clear
.
OSD
Snap Mode
Select the snap mode:
Optimized Snap
and
Tripwire
.
Relay-out
Select the Relay-out check box, and when alarm is triggered, the
system interacts with the linked alarm devices.
Alarm Delay
The Alarm linkage keeps running for the configured time after
alarm is ended.
Step 5 Set arming periods and alarm linkage action. For details, see "5.1.1 Alarm Linkage".
Step 6 Click
Save
.
Result
The ANPR result is displayed on the live interface.
●
The plate no. and attribute information of vehicle are displayed at the right side.
Loading ...
Loading ...
Loading ...