Loading ...
Loading ...
Loading ...
Operation Manual
144
threshold for noisy environment.
◇
The red line in the waveform indicates audio detection is triggered, and the green
one indicates no audio detection. Adjust sensitivity and threshold according to the
waveform.
Step 3 Set arming periods and alarm linkage action.
Step 4 Click
Save
.
5.7 Setting Smart Plan
Smart plan includes face detection, heat map, IVS, people counting, face detection, video metadata,
stereo analysis and schedule. The intelligent function can be enabled only after the corresponding
smart plan is enabled.
5.7.1 Basic Smart Plan
Step 1 Select
Setting
>
Event
>
Smart Plan
.
The
Smart Plan
interface is displayed. For smart plan icon, see the table below.
Table 5-5 Description of smart plan icon
Icon Description Icon Description Icon Description
Face
detection
Stereo vision
Heat map
Stereo
analysis
IVS
Face
recognition
People
counting
Video
metadata
Crowd map
ANPR
Vehicle
density
— —
Step 2 Enable smart functions as need.
Different cameras support different ways to enable smart functions. Select corresponding
ways to enable these functions according to the actual interface.
●
Select an icon to enable the corresponding smart plan.
Click an icon to enable it, and the selected smart function is highlighted. Click it again
to cancel the selection.
If the icon on the interface, click it to enable the smart function switch.
●
Enable smart plan through
Add Plan
.
Loading ...
Loading ...
Loading ...