Loading ...
Loading ...
Loading ...
Operation Manual
67
4.5.2.3.8 Configuring OSD Info
You can enable this function if you want to display the information of preset, PTZ coordinates, zoom,
tour and location on the video image.
Only tracking speed dome supports OSD info function.
Step 1 Select
Setting
>
Camera
>
Video
>
Overlay
>
OSD Info
.
Figure 4-61 OSD information
Step 2 Configure OSD information.
Table 4-19 Description of OSD information
Parameter Description
Preset
Select
Enable
, and the preset name is displayed in the image when the
camera turns to the preset, and it will disappear 3 s later.
Temperature
Select
Enable
and the internal temperature of the current device is
displayed.
Coordinates
Select
Enable
and the PTZ coordinates info is displayed in the image.
Zoom
Select
Enable
and the zoom info is displayed in the image. such as
, which means 12x zoom rate.
North
Select
Enable
and the north direction is displayed in the image.
RS485 Select
Enable
and it will enable RS-485 communication function.
Text
Select
Enable
and set text, and the text is displayed in the image.
Input Text
Text Align Alignment mode of the displayed information in the image.
Step 3 Move the OSD box to the position that you want in the image.
Step 4 Click
Save
.
Loading ...
Loading ...
Loading ...