Loading ...
Loading ...
Loading ...
Operation Manual
97
Figure 4-91 Path
Step 2 Select the storage method that you need for the recorded videos and snapshots of
different types.
Table 4-33 Description of path parameters
Parameter Description
Event Type
Select from
Scheduled
,
Motion Detection
and
Alarm
.
Local Save in the internal SD card.
FTP Save in the FTP server.
NAS Save in the NAS (network attached storage).
Step 3 Click
Save
.
Step 4 Configure other path parameters on
Destination
,
FTP
or
NAS
interface. For details, see
"4.7.3 Setting Destination", "4.7.3.3 FTP" or "4.7.3.4 NAS".
4.7.3.2 Local
Display the information of the local SD card. You can set it as read only or read & write; you can also
hot swap and format SD card.
Functions might vary with different models.
Select
Setting
>
Storage
>
Destination
>
Local
.
●
Click
Read Only
, and then the SD card is set to read only.
●
Click
Read & Write
, and then the SD card is set to read & write.
●
Click
Hot Swap
, and then you can pull out the SD card.
●
Click
Refresh
, and then you can format the SD card.
●
Click
Format
, and you can format the SD card.
When reading SD card on PC, if the SD card capacity is much less than the nominal capacity, you
need to format the SD card. Then the data in SD card will be cleared, and the SD card is formatted
to be private file system. The private file system can greatly improve SD card multimedia file
read/write performance. Download Diskmanager from Toolbox to read the SD card. For details,
contact aftersales technicians.
Loading ...
Loading ...
Loading ...