Loading ...
Loading ...
Loading ...
UNPACKING AND CHECKaNG
CONTENTS TOOLS NEEDED
Model No. 113.213853 is shipped complete in one car-
ton and includes a 1/2 HP 1725 RPM motor.
Separate all parts from packing materials and check
each one with the "Table of Loose Parts" to make certain
all items are accounted for, before discarding any pack-
ing material.
WARNING: For your own safety: if any parts are
missing, do not attempt to assemble the drill press,
plug in the power cord or turn the switch on until
the missing parts are obtained and installed cor-
rectly.
Remove the protective oil that is applied to the table
and column. Use any ordinary household type grease
and spot remover.
WARNING: To avoid fire or toxic reaction, never
use gasoline, naptha or similar highly volatile sol=
vents.
Apply a coat of paste wax to the table to prevent rust.
Wipe all parts thoroughly with a clean dry cloth.
COMBiNAT_
COMBINATION SQUARE MUST BE TRUE
DRAW LIGHT STRAIGHT EDGE OF
LINE ON BOARD BOARD 3!4" THICK
ALONG THIS EDGE,_ _ ._ , THIS EDGE MUST BE
_ PERFECTLY STRAIGHT
SHOULD BE NO GAP OR OVERLAP WHEN
SQUARE IS FLIPPED OVER IN DOTTED POSITION
MEDIUM
SCREWDRIVER
1/2 WRENCH
8-iNCH ADJUSTABLE
WRENCH
118"- 3/16"
HEX "L" WRENCH
item
A
B
C
D
E
F
G
H
TABLES OF LOOSE PARTS
Description Qty.
Column Assembly ...................... 1
Upper Guard .......................... 1
Head Assembly ........................ 1
Table ................................ 1
Base ................................. 1
Owners manual ........................ 1
Motor ...... _......................... 1
Box Of Small Parts ..................... 1
Part #507377
(Containing the Following Items)
Handle, Feed .......................... 3
Crank, Table .......................... 1
Handle, Belt Tension ................... .t
Clamp, Bolt ........................... 1
Key, Chuck ........................... 1
Chuck ................................ 1
Bag of Loose Parts No. 507375 ........... 1
Bag of Loose Parts No. 507375
(Containing the Following Items)
Indicator Table Support .................. 1
Screw Pan Hd. 10-32xl/4 ................ 1
Screw Hex Hd. 3/8-16xl 1/2 .............. 4
Lockwasher 3/8 ........................ 4
Key, Switch ........................... 1
Screw Soc. Set 3/8-16xl/2 ................ 2
Knob ................................ 1
Screw Pan Hd. 1/4-20xl/2 ............... 1
Screw Pan Hd. 8-32xl/2 ................. 3
Lockwasher #8 ........................ 3
Nut Hex 8-32 ........................ : .3
Bag of Loose Parts No.507440
(Containing the Following Items)
Pulley, Center ........................ :. 1
Pulley, Motor .......................... 1
A
Screw Soc. Set 1/4-20x3/8 ............... 1
Belt "V" 3/8x24 ......................... !
Belt "V" 3/8x27 ......................... t
Screw Hex Hd. 5/16-18x3/4 .............. 4
Washer 21/64x !/2x 1/32 .................. 8
Nut Hex 5/16-18 ....................... 4
5
Loading ...
Loading ...
Loading ...