Loading ...
Loading ...
Loading ...
assembly
1. Clean out the TAPERED HOLE in the chuck; clean
the spindle nose with a clean cloth. Make sure there
are no foreign particles sticking to the surfaces. The
slightest piece of dirt on the spindle nose or in the
chuck will prevent the chuck from seating properly,
This will cause the drill to "wobble."
2. Apply a light film of oil such as Sears household oil
to the spindle nose.
3. Place the chuck on the spindle nose and screw the
locking collar up as far as it will go.
\\
3116" ROD
CHUCK KEY
4. Insert a piece of 1/4" dia. STEEL ROD in to one of
the holes in the chuck body.
5. Insert 3/16" dia. rod or drill into one of the holes in
the collar... TURN IT IN THE DIRECTION OF
ARROW UNTIL IT IS TIGHT.
6. To remove chuck, turn the collar in the opposite
direction until the chuck is ejected from the spindle. /
CHUCK
BODY 1/4" ROD
OR DRILL
LOCKING
COLLAR
CHUCK
SLEEVE
12
Loading ...
Loading ...
Loading ...