Loading ...
Loading ...
Loading ...
it....... il"
add mona!safety mnstrucuons Tot ar ! presses
c. Do not install or use any drill that exceeds 7" in 13, Think Safety. Safety is a combination of operator
length or extends 6" below the chuck jaws. They common sense and alertness at all times when the
can suddenly bend outward or break, drill press is being used.
d. Do not usewire wheels, router bits. shaper cut-
ters, circle (fly) cutters or rotary planers on this
drill press.
11. Note and Follow the Safety Warnings and In-
structions that Appear on the Panel on the Left
Side of the Head:
JDANGER ]
FOR YOUR OWN SAFETY:
1. READ AND UNDERSTAND OWNERS MAN-
UAL BEFORE OPERATING MACHINE.
2. WEAR SAFETY GOGGLES.
3. DO NOT WEAR GLOVES, NECKTIE, OR
LOOSE CLOTHING. TiE BACK LONG HAIR.
4. SECURELY CLAMP WORK TO TABLE IF IT
IS TOO SHORT TO CONTACT THE COLUMN
WHEN IN OPERATING POSITION
5. USE RECOMMENDED SPEED FOR DRILL,
ACCESSORY, AND WORKPIECE MATER-
iAL.
6. SECURELY LOCK HEAD AND SUPPORT TO
COLUMN, ARM TO SUPPORT, AND TABLE
TO ARM BEFORE OPERATING DRILL
PRESS.
7. USE ONLY RECOMMENDED ACCES-
SERIES.
12, This Drill Press has 12 speeds as listed below:
300 RPM 1450 RPM
375 RPM 1530 RPrvl
525 RPM 2000 RPM
560 RPM 2200 RPM
700 RPM 3400 RPM
860 RPM 4600 RPM
See right side of Head for specific placement of
belt on pulleys.
WARNING: Do not allow familiarity (gained from
frequent use of your drill press) to become com-
monplace. Always remember that a careless frac-
tion of asecond is sufficient to inflict severe injury,
The operation of any power tool can result in foreign
objects being thrown into the eyes, which can result =n
severe eye damage. Always wear safety goggles com-
plying with ANSI Z87.1 (shown on Package) before
commencing power too! operation. Safety Goggles are
available at Sears retail or catalog stores.
unpacking and checking contents
CONTENTS PAGE
General Safety Instructions for Power Tools ...... 2
Additional Safety Instructionsfor Drill Presses .... 3
Unpacking and Checking Contents ............. 4
Table of Loose Parts ........................ 5
Motor Specifications and Electrical
Requirements .............................. 6
Assembly ................................. 7
Assembly of Column and Table Hardware .... 7
Installingthe Table ...................... 7
CONTENTS PAGE
Getting to Know Your Drill Press .............. 14
Removing the Chuck .................... 17
Drilling to Depth ....................... 17
Depth Scale ........................... 17
Basic Drill Press Operation .................. 18
Installing Drills ......................... 18
Positioning Table and Workpiece .......... 19
Tilting Table ........................... 19
Hole Location ......................... 20
installing the Head ....................... Feeding ............................. 20
Tensioning Belt ......................... 9 Adjustments .............................. 20
Installing Upper Belt Guard ............... 10
Installing Feed and Tension Handles ....... 11
Installing the Chuck ..................... 12
Installing Light Bulb ..................... 13
Adjusting the Table Square to Head ....... 13
Adjusting the Pointer .................... 13
Quill Return Spring ..................... 20
Maintenance .............................. 21
Lubrication ............................... 21
Recommended Accessories .................. 21
Trouble Shooting .......................... 22
Repair Parts .............................. 23
4
Loading ...
Loading ...
Loading ...