Loading ...
Loading ...
Loading ...
Problem Cause
The engine does not run smooth-
ly
The spark plug is defective.
The carburettor is incorrectly set.
The air filter is clogged. See
To clean and replace the air filter (R 112C, R
112C5) on page 21
.
The fuel tank vent is blocked.
There is dirt in the carburetor or fuel line.
The throttle control is set to choke position or the throttle wire is incorrectly
adjusted
The engine apparently has no
power
The air filter is clogged. See
To clean and replace the air filter (R 112C, R
112C5) on page 21
.
The spark plug is defective.
There is dirt in the carburetor or fuel line.
The throttle control is set to choke position or the throttle wire is incorrectly
adjusted
The battery does not charge The battery is defective. See
Battery safety on page 10
.
The connection at the cable connectors on the battery terminals is bad. See
To
charge the battery on page 24
.
There is vibration in the product The blades are loose. See
To examine the blades on page 25
.
One or more of the blades are unbalanced. See
To examine the blades on page
25
.
The engine is loose.
The cutting result is unsatisfacto-
ry
The blades are blunt. See
To examine the blades on page 25
.
The grass is long or wet. See
To get a good result on page 17
.
The cutting deck is skew.
There is grass blockage in the cutting deck. See
To clean the product on page
19
.
The tire pressure is different on the right and left sides. See
Tire pressure on
page 25
.
The product is operated at a too high speed. See
Technical data on page 31
.
The engine speed is too low. See
Technical data on page 31
.
The drive belt slips.
Transportation, storage and disposal
Transportation
• The product is heavy and can cause crush injuries.
Be careful when you load it onto or off a vehicle or
trailer.
• Do not lift the product. The transport eyelets are
not approved lifting points and must only be used
to attach the product safely to a trailer.
• Use an approved trailer for transportation of the
product.
28 1466 - 006 - 17.04.2023
Loading ...
Loading ...
Loading ...