Loading ...
Loading ...
Loading ...
a) For R 112C. b) For R 112C5 and R 115C.
4. Drain the engine oil into the container.
5. Attach the drain plug and tighten it.
6. Fill with new engine oil. Refer to
To do a check of the
engine oil level, (R 115C) on page 26
.
7. Install the dipstick.
8. Let the engine become warm, then make sure that
there is no leakage from the oil drain plug.
Troubleshooting
Troubleshooting schedule
If you cannot find a solution to your problems in
this owner's manual, speak to your Husqvarna service
agent.
Problem Cause
The starter motor does not turn
the engine over
The parking brake is not applied. See
To apply and release the parking brake on
page 17
.
The lift lever for the cutting deck is in mow position. See
To lift and lower the
cutting deck on page 14
.
The main fuse is blown. See
To replace the main fuse on page 23
.
The ignition lock is defective.
The connection between the cable and the battery is bad. See
To charge the
battery on page 24
.
The battery is too weak. See
To charge the battery on page 24
.
The starter motor is defective.
The engine does not start when
the start motor turns the engine
over
There is no fuel in the fuel tank. See
To fill fuel on page 13
.
The spark plug is defective.
The ignition cable is defective.
There is dirt in the carburettor or fuel line.
1466 - 006 - 17.04.2023 27
Loading ...
Loading ...
Loading ...