Loading ...
Loading ...
Loading ...
9
ENGLISH
DISPLAY ‘HOME PAGE’
After powering up the unit, the unit boots (it takes a few seconds) and the firmware
release is displayed (for example: 8.03).
As soon as the initialisation ends, the current preset number and name will be displayed.
The preset number indication is the menu ‘home page’.
The asterisk (when displayed after the preset number) indicates that the current preset
has been edited (parameter value modifications, toggled ‘mute’ buttons, etc.), so the
current settings do not correspond to the ones of the respective stored preset (that needs
to be recalled if it is necessary to restore all previous settings).
DX 2006 is now operating.
*** RCF ***
***** RCF *****
DX2006 v8.03
***** RCF *****
P 0 1 * _ _ _ _ _ _ _ _
Press and hold a MENU key [P] and press (at the same time) the MUTE buttons [5,
9] of inputs / outputs that need to be edited. GAIN/MENU LEDs [4, 8] of selected
inputs / outputs indicate green.
It is possible to link either the two inputs or more outputs for common parameter
modification.
It is not possible to edit both inputs and outputs at the same time, therefore first it is
necessary to remove all inputs from the edit mode before adding outputs (or vice versa).
Multiple inputs / outputs can be linked or unlinked by pressing sequentially the respective
MUTE buttons [5, 9] (when a MENU key is pressed and held). Any data modification
for the selected input / output is applied to the linked inputs / outputs as well.
IN THE EDIT MODE:
Press the MENU key [P] to select the next menu
Press the MENU key [P] to select the previous menu
Press the CURSOR key [P] to select the next parameter
Press the CURSOR key [P] to select the previous parameter
Turn the DATA rotary thumb wheel [{] to adjust values
Press the EXIT key [P] to quit.
-
-
-
-
-
-
INPUT / OUTPUT MENUS
Loading ...
Loading ...
Loading ...