Loading ...
Loading ...
Loading ...
11
ENGLISH
I1:______ EQ1
EQ#:1
EQ#
Selection of the band to be edited among the 8 available (EQ1 ÷ EQ8).
BYPASS
This parameter toggles the selected band bypass.
If set to ON, the current band setting will not affect the signal.
TYPE
It is possible to choose among 5 different types:
parametric equalizer (PEQ)
low-shelf filter (LO-SHF)
hi-shelf filter (HI-SHF)
first-order all-pass filter (AP-1)
second-order all-pass filter (AP-2)
Parametric equalizers (PEQ) allow to adjust the level L at the settable centre frequency
Fc and specify the bandwidth BW (the adjusted level can be widened or narrowed).
-
-
-
-
-
I1:______ EQ1
BYPASS:Off
I1:______ EQ1
TYPE:PEQ
Low-shelf filters increase or decrease the level of all frequencies below the centre
frequency by the specified amount.
Hi-shelf filters increase or decrease the level of all frequencies above the centre
frequency by the specified amount.
All-pass filters pass all frequencies equally, but change the signal phase.
FREQ
Equalizer centre frequency setting. Its range is from 20 Hz to 30 kHz in either 1 Hz or
1/36 octave steps (the frequency steps can be chosen in the ‘System menu’, please refer
to the respective manual section).
BW (PEQ, LO-SHF, HI-SHF, AP-2 filters only)
Equalizer bandwidth setting.
Its range is from 0.02 to 3.61 octaves in 0.01 steps.
The equivalent ‘Q factor’ value is automatically displayed besides the octave value.
DEG (AP-1 filter only)
If the first-order all-pass (AP-1) filter is selected, this parameter will set the phase shift
degree at the centre frequency.
The phase shift is gradually changed from 180 degrees to the specified value of the
centre frequency.
LEVEL (PEQ, LO-SHF, HI-SHF filters only)
Equalizer level setting.
Its range is from –30.00 dB to +15.00 dB in 0.25 dB steps.
I1:______ EQ1
FREQ:1000Hz
I1:______ EQ1
BW:0.33 Q=4.36
I1:______ EQ1
DEG:15.5 deg
I1:______ EQ1
LEVEL:0.00dB
EQ (EQUALIZATION) MENU
EQ (EQUALIZATION) MENU
PEQ
Loading ...
Loading ...
Loading ...