RCF DX 2006 2 INPUT, 6 OUTPUT DIGITAL PROCESSOR

OWNER'S MANUAL - Page 15

For DX 2006.

PDF File Manual, 36 pages, Read Online | Download pdf file

DX 2006 photo
Loading ...
Loading ...
Loading ...
15
ENGLISH
INPUT / OUPUT COPY MENU
THIS MENU ALLOWS TO COPY INPUTS / OUTPUTS:
When the source and the target are both inputs, all parameter values will be copied
When the source and the target are both outputs, all parameters values will be copied
If the source is an input and the target is an output (or vice-versa), ‘Level’, ‘Polarity’,
‘Delay’, ‘EQ’ and ‘Name’ will be copied only.
SOURCE
Source input / output from which data are copied.
TARGET
Target input / output to which data are copied.
GENERAL SETTINGS MENU
FREQ MODE
Setting of the frequency control mode for EQ and crossover filters.
It can be either 36 steps/octave or all frequencies (1 Hz resolution).
DELAY UNIT
Delay unit setting: the delay can be displayed in either milliseconds (ms) or equivalent
feet (ft) or metres (m).
COMMUNICATION SETTINGS MENU
NoTE: ThE UNIT NEEds To bE rEbooTEd (swITch ThE UNIT off, ThEN oN agaIN) bEforE NEw
coMMUNIcaTIoN sETTINgs TakE EffEcT.
DEVICE ID
This setting assigns a device ID number (from 1 to 16) to the unit. This ID is only useful
when a network of more than 1 device is used. In normal operation the device ID is 1.
BAUD RATE
Serial communication baud rate setting.
PC ‘XConsole’ uses a baud rate of 115200, so this value should be left unchanged.
SECURITY MENU
PASSWORD
A new DX 2006 does not require a password.
The device can be protected against unauthorized editing by a 4-character password,
which can be stored when using the PC ‘Xconsole’ software only.
When the correct password is entered, the parameter protection will be disabled.
After re-entering the password (or turning the unit off), the parameter protection will be
enabled again.
Press the CURSOR key [P] to select the next character.
Press the CURSOR key [P] to return to the previous character.
Turn the DATA rotary thumb wheel [{] to change characters.
-
-
-
INPUT / OUPUT COPY MENU
GENERAL SETTINGS MENU
COMMUNICATION SETTINGS MENU
SECURITY MENU
SYSTEM Copy
SOURCE:In1
SYSTEM Copy
TARGET:In2
SYSTEM Generl
FREQ MODE:All
SYSTEM Generl
DELAY UNIT:ms
SYSTEM Comm
DEVICE ID:1
SYSTEM Comm
BAUD RATE:115200
SYSTEM Secure
PASSWORD:____
Loading ...
Loading ...
Loading ...