Loading ...
Loading ...
Loading ...
7
ENGLISH
FRONT PANEL
1 USB port (type B) for PC link. The driver (from the provided software CD) must be installed.
2 RS232 port (standard DE-9 socket). A ‘straight cable’ is required for PC connection.
3 Input Level LEDs that indicate the current signal level of each input: SIGNAL (signal
presence), –12 dB, –6 dB, –3 dB, OVER/LIMIT (that refers to the device maximum headroom).
4 GAIN/MENU LEDs that indicate the activated inputs for data modification.
5 MUTE Buttons with LEDs – Each button mute or unmute its respective input.
When an input is muted, its LED indicates red.
6 LCD – Display that shows all necessary information to control the unit.
7 Output Level LEDs that indicate the current signal level of each output: SIGNAL (signal
presence), –12 dB, –6 dB, –3 dB, OVER/LIMIT (that refers to the limiter threshold).
8 GAIN/MENU LEDs that indicate the activated outputs for data modification.
9 MUTE Buttons with LEDs – Each button mute or unmute its respective output.
When an output is muted, its LED indicates red.
P Keyboard made of 6 keys:
MENU : while editing, press to select the previous menu.
MENU : while editing, press to select the next menu.
IMPORTANT:
If a MENU kEy Is prEssEd aNd hEld, MUTE bUTToNs [5, 9] caN bE UsEd To sElEcT whIch INpUTs /
oUTpUTs arE affEcTEd by paraMETEr valUE chaNgEs.
When inputs / outputs are editable, their GAIN/MENU LEDs [4, 8] indicate green.
It is possible to link either the two inputs or more outputs for common parameter
modification.
It is not possible to edit both inputs and outputs at the same time, therefore first it is
necessary to remove all inputs from the edit mode before adding outputs (or vice-versa).
CURSOR: while editing, press to select the previous parameter.
CURSOR : while editing, press to select the next parameter.
ENTER: press to access the system menus; while editing, press to confirm.
EXIT: Press to quit and return to the menu ‘home page’.
{ DATA : rotary thumb wheel that allows to change parameter data values.
This wheel has travel velocity sensing which eases large incremental data modifications.
When adjusting the delay time, pressing and holding the ENTER key permits to increase /
decrease the data value by 1 second steps.
IMPORTANT
1
2
3
4 5 6 8
7
9 10 11
Loading ...
Loading ...
Loading ...