Loading ...
Loading ...
Loading ...
6
Cleaning Instructions
IMPORTANT: Do not use wire brush, scouring pad, etc., as they
may damage the filters.
Rinse filter under running water until most soils are removed. If
you have hard-to-remove soils or calcium deposits from hard
water, a soft brush may be required.
For more detailed instructions
on how to install the filter after
cleaning, watch the video by
scanning the QR code:
Error Codes/Blinking Lights
Issue Code
Shown
(7 Seg
Display)
(if present)
Code Shown
on Front Panel
LED *
(# blinks,
Pause, #
blinks)
What will happen? What to do?
Dishwasher fails
to operate fill
valve correctly
F1E1/F1E5 1 Pause 1
Pause - pause,
repeat
Drain sequence will
begin, machine
operation will be
prevented.
Turn off water to unit (if possible).Turn off power to
unit. If the water cannot be turned off, DO NOT turn
off power and keep door closed. Press Cancel key
one time to silence alarm tone. Call service.
Motor controller
failure
F1E2 1 Pause 2
Pause, repeat
Cycle ends. Call service.
No water present
at dishwasher
H2O 8 Pause 1
Pause - pause,
repeat
Cycle is paused. Ensure fill hose is connected to product. Ensure water
supply is turned ON. Press Start to resume cycle. If
alarm still present, call service.
User interface
service
communication
fault
F6E1 6 Pause 1
Pause - pause,
repeat
Product will not able to
start or resume cycles.
Call service.
Wash motor
failure
F7E2 7 Pause 1
Pause, repeat/7
Pause 2 Pause,
repeat
Cycle ends. Call service.
Sensor detects
water left in the
sump
F7E3 7 Pause, 3
Pause - pause,
repeat
Cycle ends. Call service.
26-Jun-2023 08:47:55 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Loading ...
Loading ...
Loading ...