Whirlpool WDT550SAPZ 24 Inch Built-In Dishwasher with Stainless Steel Tub, 3rd Rack in Fingerprint Resistant Stainless Steel

Owners Manual - Page 10

For WDT550SAPZ.

PDF File Manual, 64 pages, Download pdf file

Loading ...
Loading ...
Loading ...
10
Water Inlet Adapter for hose
with Leak Detection System
(on some models)
Additional/tall Toe Panel
shipped uninstalled at the back
of the dishwasher.
Cabinet Grommet (corrugated
tubing)
For 1
1
/
2
" (38 mm) hole in
cabinet
NOTE: Required for metal
cabinets.
Moisture Barrier Tape
NOTE: Moisture barrier tape is
recommended if installing a
dishwasher under a wooden
countertop.
#3.5 x 18 mm screws (4) for
Cabinet mount
Salt funnel
Floor insulation (on some
models)
Studs (on some models)
T-Gasket (on some models)
Make sure all these parts are included in the literature package.
Optional Accessory Parts Available:
Call us at our toll-free number or visit our website listed on the
Quick Start Guide for optional accessory part information.
First-Time Installations
Check local codes. Check existing electrical supply. See the
“Electrical Requirements” section. It is recommended that
electrical connections be made by a licensed electrical installer.
Additional Parts Needed (not provided):
3/8" (9.5 mm) to 3/4" (19 mm)
elbow fitting adapter with inlet
hose
Whirlpool Part Number,
W10278635RP, 6 ft (1.8 m)
inlet hose
Whirlpool Part Number,
8212486, 12ft (3.6 m) inlet hose
Screw-Type Clamps
1
1
/
2
"-2" (38 mm-50 mm)
(3 maximum)
Optional Water Drain
Extension Maximum length
12 ft (3.7 m) with a drain hose
clamp.
Whirlpool Part Number,
8269144A
NOTE: Be sure to purchase only Whirlpool factory-certified parts
and accessories for your appliance. Your installation may require
additional parts. To order, refer to the contact information
referenced in your Quick Start Guide.
For Power Cord
Power Cord Kit
Kit typically includes power cord (Cord Kit - Straight: Whirlpool
Part Number W11670634, Right Angle: Whirlpool Part Number
W11645183), Cable fitting.
NOTE: The Cord Kit - Straight: Whirlpool Part Number
W11670634 is recommended for most installations.
For proper installation, refer to the installation instructions
provided with the kit.
NOTE: Be sure to purchase only Whirlpool factory-certified parts
and accessories for your appliance. Your installation may require
additional parts. To order, refer to the contact information
referenced in your Quick Start Guide.
26-Jun-2023 08:47:55 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Loading ...
Loading ...
Loading ...