Loading ...
Loading ...
Loading ...
13
� Be sure when installing or moving the appliance that the power
cord is not kinked or damaged.
WARNING: To reduce the risk of electric shock, fire, or
injury to persons, the installer must ensure that the
dishwasher is completely enclosed at the time of installation.
Before You Begin
WARNING
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing appliance.
Failure to do so can result in death or electrical shock.
1. Disconnect power
Disconnect electrical power at the fuse box or circuit breaker
box before installing dishwasher.
2. Shut off water supply
Shut off water supply to the dishwasher.
Prepare Cabinet Opening – New
Utilities
NOTE: The electric and water holes may or may not be on the
same cabinet wall. It will depend on the location of water and
electric connections.
3. Drill hole location for Water Supply and Drain
hose (Preferred hole type)
D
A
E
D
C
B
F
A. 6" (152 mm), minimum height of allowable area from bottom for
utility connections.
B. 1/2" (12.7 mm), Thickness of back cabinet wall.
C. 2
1
/
4
" width x 6
1
/
16
" height (57.20 x 154.40 mm), Allowable area
for utility connections.
D. 1
3
/
4
" (44.4 mm), Diameter of Oval hole for water supply and drain
hose.
E. 3
3
/
4
" (95.3 mm), Height of Oval hole for water supply and drain
hose.
F. 2
1
/
4
" (57.1 mm), Distance between center of Oval hole to the
back of the cabinet wall.
4. Drill hole locations for Water Supply and Drain
hose (Optional hole type)
A
E
D
E
B
C
D
F
G
A. 6" (152 mm), minimum height of allowable area from bottom for
utility connections.
B. 1/2" (12.7 mm), Thickness of back cabinet wall.
C. 3
1
/
2
" width x 6" height (88.9 x 152.4 mm), Allowable area for
utility connections.
D. 1
1
/
2
" (38.1 mm), Diameter for drain hose hole.
E. 3
1
/
2
" (88.9 mm), Diameter for water supply hose hole.
F. 2
1
/
4
" (57.1 mm), Distance between center of water supply hose
hole to the back of the cabinet wall.
G. 1
1
/
4
" (31.7 mm), Distance between center of Drain hose hole to
the back of the cabinet wall.
5. Drill location for Electrical conduit hole
D
A
B
C
D
E
A. 6" (152 mm), minimum height of allowable area from bottom for
utility connections.
B. 1/2" (12.7 mm), Thickness of back cabinet wall.
C. 1
1
/
2
" width x 12" height (38.1 x 304.8 mm), Allowable area for
utility connections.
D. 1
1
/
2
" (38.1 mm), Diameter for Electrical conduit hole.
E. 1
1
/
4
" (31.7 mm), Distance between center of Electrical conduit
hole to the back of the cabinet wall.
26-Jun-2023 08:47:55 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Loading ...
Loading ...
Loading ...