Loading ...
Loading ...
Loading ...
34
2.
Press Enter to accept the default 74:00 hours and
start Sabbath Mode or use the numeric keypad to
enter the desired Sabbath Mode timer value. Timer
values between 0:01 and 74:00 can be entered.
Note: If no changes are made within 10 seconds,
Sabbath Mode auto starts.
3.
Once Sabbath Mode has begun, the display changes
to show the message “SABBATH ON”.
4.
After the Sabbath Mode countdown reaches zero, the
oven displays the current time and the message
“SABBATH”. No changes can be made at this point.
To end the Sabbath Mode and return to normal
function, press the Oven Clear/Off button.
Notes
▯ The temperature range in Sabbath Mode is 100°F
to 450°F.
▯ The Sabbath Mode timer can be set between 0:01
and 74:00 hours.
To edit the Sabbath Temperature:
While editing the temperature in Sabbath Mode there is
no feedback from the control. If an invalid temperature is
set, the oven will default back to the previous running
temperature.
1.
Press the Bake button.
2.
Enter the new desired set temperature.
3.
Press Enter.
The oven will adjust its set temperature after randomized
delay.
Panel Lock
Allows the user to disable all buttons on the control
panel. Panel Lock can only be enabled in Standby mode.
1.
To enable Panel Lock, press and hold the Panel Lock
button for 3 seconds (in Standby mode).
2.
To disable Panel Lock, press and hold the Panel Lock
button for 3 seconds. The display returns to Standby
mode.
Settings
The oven setup menu is used to customize certain oven
settings.
The oven must be in Standby mode (no cooking mode or
timer running) in order to access the setup menu.
To make changes to Settings menu items:
1.
Press the Settings button.
2.
The fist setup item is displayed. The display shoes
“SET CLOCK”. Press Settings again to access the
settings menu.
3.
To display a different setup item, press the number
corresponding to that setting (see table following or
press the Settings button to cycle through available
options).
4.
To change the value for the displayed setting, press
the Enter button to enter the edit mode. Use the
numeric keypad to change the setting value. The
corresponding setting value is shown in the table
following.
For the temperature offset, with the item in edit mode,
press “-” or “+” first, then the numeric offset value.
The new value is automatically accepted as the display
reverts from edit mode back to display mode.
To exit the Settings menu:
Press the Oven Clear/Off button.
Loading ...
Loading ...
Loading ...