Loading ...
Loading ...
Loading ...
33
5.
The probe current temperature and target temperature
are both displayed in the format “105/180” at the
lower right corner of the display. The actual
temperature will display <80 until the food temperature
reaches 80°F.
The displayed probe temperature is updated in
increments of 5° during the cooking process.
6.
When the probe temperature reaches the set
temperature, the cooking mode turns off. The current
time is displayed and the message “COOKING
COMPLETE” blinks at the bottom left of the display. An
alarm tone sounds every 10 seconds for 2 minutes.
This screen remains in the display until it is cleared by
pressing the Oven Clear/Off button or until the probe
is removed. The display then goes back to Standby
mode.
Notes
▯ Probe is not available when an Oven Timer has
been set.
▯ To change the probe temperature, press the Probe
button. The display enters probe temperature
editing mode and displays the message “SET
PROBE TEMP”. Enter the new probe temperature
and press Enter to accept the new value.
▯ Do not store the probe in the oven.
▯ Always use the handle of the probe for inserting and
removing.
▯ Always use a potholder to remove the probe since it
becomes hot.
▯ Since meat continues to cook after being removed
from the oven, set the internal (probe) temperature
5°-10° below the desired final internal temperature
except with poultry.
Sabbath Mode
The Sabbath Mode enables those of particular faiths to
use their ovens on the Sabbath.
The Sabbath Mode can be entered in a Bake mode only.
The bake temperature must be within the Sabbath Mode
temperature range of 100° to 450°F.
If the oven light is on at the start of Sabbath Mode, it
remains on throughout the Sabbath Mode operation. If
the oven light is off at the start of Sabbath Mode, it
remains off throughout the Sabbath Mode operation.
To set the Sabbath Mode:
No kitchen timers or oven timers may be running when
Sabbath Mode is entered.
1.
Begin a Bake operation. While Bake is running, press
and hold the Oven Timer button for 5 seconds.
The message:”SABBATH NOT AVAILABLE” is
displayed if a timer is running or the set temperature is
outside the allowable range.
If no timers are running, the Sabbath Mode settings
appear in the display. The Sabbath Mode timer blinks
showing the value can be edited. The default value is
74:00 (the maximum number of hours for which
Sabbath Mode can be set).
Loading ...
Loading ...
Loading ...