Loading ...
Loading ...
Loading ...
18
Separating the two elements
Select one of the two elements in the flexible cooking
zone and touch the Flex Join/Split key.
This deactivates the flexible cooking zone. The two
elements will now function independently.
Notes
▯ If the element is switched off, and then switched back
on again later, the flexible cooking zone is reset to
function as two independent elements.
▯ To change the configuration settings for the flexible
cooking zone, refer to the section on ~ "Basic
settings"
PowerMove function
This function activates the entire flexible cooking zone,
which is divided into three cooking areas and which has
preset power levels.
Only use one item of cookware. The size of the cooking
area depends on the cookware used and whether it is
positioned correctly.
This means that an item of cookware can be moved
during the cooking process to another cooking area with
another power level:
Preset power levels:
Front area = power level
Š
Middle area = power level †
Rear area = power level‚.†
The preset power levels can be changed independently
of one another. You can find out how to change these in
the section on ~ "Basic settings"
Notes
▯ If more than one item of cookware is detected on the
flexible cooking zone, the function is deactivated.
▯ If the cookware is moved within the flexible cooking
zone or lifted up, the cooktop automatically starts
searching and the power level of the area in which the
cookware was detected is set.
▯ You can find information on the size and positioning of
the cookware in the section on the function
~ "FlexInduction
®
cooking zone"
Activation
1.
Select one of the two elements in the flexible cooking
zone.
2.
Touch the Power Move key. The indicator beside the
Power Move key lights up. The flexible cooking zone is
activated as a single cooking zone.
The power level in the area in which the cookware is
located lights up in the cooking zone display.
The function has now been activated.
Changing the power level
The power levels for the individual cooking areas can be
changed during the cooking process. Set the cookware
down on the cooking area and change the power level
using the number keys.
Notes
▯ Only the power level in the area in which the cookware
is located is changed.
▯ If the function is deactivated, the power levels for the
three cooking areas are reset to the preset values.
Deactivating
Touch the Power Move key. The indicator beside the
Power Move key goes out.
The function was deactivated.
Note: If one of the cooking areas is set to ‹, the function
deactivates after a few seconds.
Cooking areas
Loading ...
Loading ...
Loading ...